Zhangjiagang Sunswell Machinery Co., Ltd.
Sunswell Machinery Co., Ltd. Bottling machines for water, juice, carbonated drinks, milk and oil with 12 years of global market experience and more than 50 countries presence.
Add to Cart
5L Bottle Fully automatic Blow Molding Machine PLC Controlled 1200 - 1400 Psc / hr
SSW-5L-2 is the fastest liner blow molding machine in mainland of China by now. SSW-5L-2 reaches around 1500BPH for 5L bottle. Its baking tunnel is separated from the blow station so that time for mold opening is shortened with a result of speedy blowing and high output, damage to machine is lessened so as to keep reliable performance and prolong service life, as well as machine runs more smoothly and steadily.
SSW-5L-2 is controlled by PLC. The whole process from preform feeding to bottle discharging is completed automatically with advantages of labor saving and no pollution. SSW-5L consists of three main parts: preform loading system, Heater channel & blow station.
Specifications:
|
TYPE |
ITEM |
UNIT |
Technical Data |
|
Container |
Product material |
/ |
PET |
|
Container volume |
L |
5 |
|
|
Theoretic output |
Psc/hr |
1200-1400 |
|
|
Preform length |
MM |
50-400 |
|
|
Max height of bottle |
MM |
400 |
|
|
Molding |
Preform inner diameter |
mm |
15-60 |
|
Bottle diameter |
mm |
35-110 |
|
|
Max mold plate dimension (L × W) |
mm |
380 × 460 |
|
|
Max mold thickness |
mm |
200 |
|
|
Air compressor |
High pressure compressor |
M3/Mpa |
1.0/30 × 3sets |
|
Locking force |
KN |
320 |
|
|
Mold opening stroke (adjustable) |
mm |
200 |
|
|
Low pressure compressor |
M3/Mpa |
2.0/30 × 1set |
|
|
Air dryer |
M3/Mpa |
2.0/30 × 1set |
|
|
Main machine electricity |
Power |
KW |
30 |
|
Voltage / frequency |
V/Hz |
380/50hz |
|
|
Machine size and weight |
Main machine (L × W × H) |
M |
3.2 × 1.8 × 2.0 |
|
Main machine weight |
T |
3.2 |
|
|
Conveyor (L × W × H) |
M |
1.4 × 1.1 × 1.85 |
|
|
Conveyor weight |
T |
0.4 |
|
|
High pressure compressor (L × W × H) |
M |
2.20 × 0.955 × 1.50 × 1set |
|
|
Low pressure compressor (L × W × H) |
M |
1.85 × 0.75 × 1.50 |
|
|
High pressure air reservoir tank (D × H) |
M |
0.70 × 2.25/3.0 |
|
|
Air dryer (L × W × H) |
M |
0.85 × 0.50 × 0.95 |
|
|
Air filters |
Kg |
10 × 5pcs |
|
|
Cooling water: cooling water recycling system can be used with its power of 8~10 liter per minute and 2~3 kilos water pressure |
|||
|
Total power: 51.9 high pressure air volume (1m/min); low pressure air volume (1.2m/min) |
|||
|
Safety |
Auto emergency alarm |
Safety inter-locking device |
|
Applications:
To make PET bottles for water, carbonated drinks, edible oil, juice and other liquid bottling
Features:
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.3percent.
MACHINE SPECIFICATIONS
|
Name |
Brand |
Original |
|
Blowing cylinder |
FESTO |
Germany |
|
Mould closing and opening cylinder |
FESTO |
Germany |
|
valve |
FESTO |
Germany |
|
Revolve cylinder |
SMC |
Japan |
|
PLC |
MITSUBISHI |
Japan |
|
HMI SCRENN |
WINVIEW 506L |
Taiwan |
|
Switch |
OMRON |
Japan |