Zhangjiagang Sunswell Machinery Co., Ltd.
Sunswell Machinery Co., Ltd. Bottling machines for water, juice, carbonated drinks, milk and oil with 12 years of global market experience and more than 50 countries presence.
Add to Cart
Automatic mineral water bottling plants machinery from China factory
Features:
The bottle is transferred to filling machine through blowing wind.
The rotating disk is all made of SUS304 stainless.
The delivery line Come with heavy duty fan and dust-proof design
Fully autonatic rinsing ,filling and capping by PLC control
Parameter:
| Production Output | 1500BPH @ 5L bottle |
| Rinsing heads | 12pcs |
| Filling nozzles | 12pcs |
| Capping heads | 4pcs |
| Suitable to PET bottle Size | Diameter Φ140~Φ200mm Highness:160~400mm, Bottle volume from 4liter to 10liter |
| Suitable to Caps | Same diameter PCO screw caps |
| Washing Water Required | 2500 liter per hour |
| Washing Pressure Required | 0.25Mpa |
| Washing time | 3seconds |
| Water drip time | 2seconds |
| Working Power | 380V AC 3-phase |
| Compressed Air Pressure (for caps arranger) | 0.7MPa |
| Compressed Air Consumption (for caps arranger) | 0.7m3/min |
| Control Panel Power | 24V DC |
| Filling Pressure | Normal pressure (gravity) |
| Filling Nozzle speed | 400ml per second |
| Machine Size | 3260 x 2660x2700mm |
| Gross Weight | 2700kg approximately |
| Total Power | 3.92Kw |
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism which have a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang