Zhangjiagang Sunswell Machinery Co., Ltd.
Sunswell Machinery Co., Ltd. Bottling machines for water, juice, carbonated drinks, milk and oil with 12 years of global market experience and more than 50 countries presence.
Add to Cart
Automatic Glass Bottle Rinsing Filler Capping and Packing Machine Cost
Specifications:
Material: SUS304 or SUS316
Control: PLC+Touch screen
Capacity: 500-1000 BPH
Bottle volume: 3-18L
Advantages: automaitc control, high speed, easy operation
Features:
i. This machine has speed regulating motor so that the production capacity can be adjusted according to customer requirement easily.
ii. Fixed structure, impeccable controlling system and easily for operating and maintain.
iii. All our filling accessory have been well polished, and have nice appearance , fast filling speed, without any leakage;
iv. When change the bottles, only need to change the starwheel and guide plate, no other machine accessory need to change.
Technical parameters:
| Model | Producing capacity |
| RFCW3-3-1/4-4-1 | 300BPH-450BPH |
| RFCW8-8-4/9-9-4 | 500BPH-1000BPH |
| RFCW12-12-4/12-12-5 | 1500BPH |
| RFCW16-16-5 | 2500BPH |
| RFCW18-18-6 | 4000BPH-5000BPH |
We can totally produce according to your requirement!
Main features
1. Bottle infeed
2. Rinser
The rotary wheel is a fully SUS304 stainless steel welded structure.
The machine applies unique overturning bottle clamp, which is an innovation of our company. This bottle clamp grips bottle at neck position, avoiding bottle mouth thread contamination caused by rubber gripper block of a traditional bottle clamp. Made of SUS304 stainless steel, this bottle clamp is hygienic and durable.
The high efficiency atomizing spay nozzle installed on bottle clamp is capable of cleaning any part of bottle inner wall, and also saves rinsing water.
All sliding bushes of lifting device use Igus (Germany) anti-corrosion maintenance free bearing.
The rinser is driven by driving system positioned inside machine frame via gear transmission.
3. Filler
Rotary wheel fully made of stainless steel SUS 304.
Gravity filling method.
Filling valves are made of SUS304.
Filling valves are reasonably structured with accurate filling.
Bottles go up and down in the function of cam through elevator, to process filling with contact to bottle-mouth.
Level of cylinder is controlled with float-ball.
Filler is driven through gears inside the machine frame.
Link-wheels in rinser, filler and capper are transported in ringed support of bottle-neck.
4. Capper
Cap distributing chute is equipped with reverse cap stop and reverse cap pick-out mechanism which have a photocell switch to stop the capper when there is no cap inside the chute.
The capper is equipped with inlet bottle detection switch.
Centrifugal way of cap arranging is adopted to reduce damage of caps.
5.Main configuration
Touch screen: Mitsubishi, Thinget or Weinview
PLC program controller: Mitsubishi or Omron
Inverter: Mitsubishi or Omron
Photoelectrical controller: AUTONICS
Other electrical components: Schneider
Pneumatic component: Airtac
Pump: Nanfang